filename: tfs 1237c.doc version 1.0 21.08.2013 vectron international filter specification tfs 1237 c 1/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedance: input: 200 output: 200 characteristics remark: the maximum attenuation in the pass band is defined as the insertion loss a e . the nominal frequency f n is fixed at 1235.5 mhz without any tolerance or limit. the values of absolute attenuation a abs are guaranteed for the whole operating temperature range. the frequency shift of the filter in the op erating temperature range is included in the production tol erance scheme. d a t a typ. value tolerance / limit insertion loss in pb a e 3.7 db max. 4.5 db nominal frequency f n - 1235.5 mhz passband pb - f n 18.5 mhz pass band ripple p-p 0.8 db max. 1.0 db pass band variation 1.5 db max. 2.5 db absolute attenuation a abs 0.3 mhz ? 1000 mhz 27 db min. 25 db 1000 mhz ? 1177 mhz 27 db min. 20 db 1297 mhz ? 1360 mhz 32 db min. 12 db 1360 mhz ? 2500 mhz 29 db min. 25 db group delay ripple - 1217 mhz ? 1237 mhz 7 ns max. 10 ns 1237 mhz ? 1254 mhz 10 ns max. 15 ns group delay variation (unit to unit) **) +/- 2.5 ns max. +/- 5 ns vswr within pb 2.0 :1 max. 2.2 : 1 input power level in pb - max. 10 dbm operating temperature range otr - - 40 c ... + 85c storage temperature range - - 45 c ... + 85c temperature coefficient of frequency tc f *) -76 ppm/k *) ? f c (hz) = tc f (ppm/k) x (t - t o ) x f cat (mhz) **) measured at 1241.5 mhz, 1245.5 mhz, 1249.5 mhz generated: checked / approved:
filename: tfs 1237c.doc version 1.0 21.08.2013 vectron international filter specification tfs 1237 c 2/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. filter characteristic construction and pin connection (all dimensions in mm) 1 2 3 5 6 7 4 8 1 ,0 +/-0,15 3 ,0 +/-0,15 0,6 +/-0,15 0,6 +/-0,15 0,6 +/-0,15 3 ,0 +/-0,15 6 0 1 3 7 5 date code 200 test circuit c 37c d20 1 input 1 2 ground 3 input 2 4 ground 5 output 2 6 ground 7 output 1 8 ground date code: year + week d 2013 e 2014 f 2015 ... 0 300 600 900 1200 1500 1800 2100 2400 2700 3000 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 frequency in mhz s21 in db 1191 1199 1207 1215 1223 1231 1239 1247 1255 1263 1271 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 frequency in mhz s21 in db 1191 1199 1207 1215 1223 1231 1239 1247 1255 1263 1271 0 0.005 0.01 0.015 0.02 0.025 0.03 0.035 0.04 0.045 0.05 frequency in mhz gdr in s saw 2, 4, 6, 8 3 5 7 1
filename: tfs 1237c.doc version 1.0 21.08.2013 vectron international filter specification tfs 1237 c 3/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. stability characteristics, reliability after the following tests the filter shall meet the whole specification: 1. shock: 500g, 1 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0.35 mm or 5g respe ctively, 1 octave per min, 10 cycles per plane, 3 planes; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 15 min. each / 1 00 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: three ti mes max.; for temperature conditions, see page 4: "air reflo w temperature conditions" 5. esd ansi/esd s20.20-1999 , class 1a for hbm this filter is rohs compliant (2002/95/eg, 2005/618 /eg) packing tape & reel: iec 286 ? 3, with exception of value f or n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at start including leader : min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direction pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 ao : 3,25 0,1 bo : 3,25 0,1 ct : 5,3 0,1 reel (all dimensions in mm) a : 180 w1 : 8,4 +1,5/-0 w2(max) : 14,4 n(min) : 60 c : 13,0 0,2
filename: tfs 1237c.doc version 1.0 21.08.2013 vectron international filter specification tfs 1237 c 4/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/ second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak temperature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260c 217c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: tfs 1237c.doc version 1.0 21.08.2013 vectron international filter specification tfs 1237 c 5/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. history version reason of changes name date 1.0 generation of filter specification noack 21.08.2013
|
